Rear end-play shims .010" 3 and 4 tang. 10 Per bag. More Information
More Information
Thread tap is required to use this fitting.More Information
Sonnax 22771A-02K is designed to allow oil to flow into the converter charge circuit as soon as the engine is started. No machining required.More Information
This valve is designed to allow oil to flow into the converter charge circuit as soon as the engine is started. Tool # F-22771A-TL7 is also required. More Information
This Sonnax transmission valve is designed for all rear wheel drive CHRYSLER units. This manual shift valve allows converter charge in park and reverse and DOES NOT cause forward clutch drag in park. No machining required. More Information
Continuous movement and vibration of the shifter causes wear to the valve body detent ball bore. By oversizing the detent bore and installing this precision steel sleeve and ball replacement corrects the problem. Sonnax 22771-TL12 tool is required. More Information
Use with 22771-12K More Information
Corrects over sensitive 3-2 kickdown and late 2-3 upshift. More Information
Sonnax 22771-HDK3 More Information
The Sonnax oversized lockup boost valve restores the proper pressures to the switch valve and main regulator valve, ensuring proper flow through the converter and lube circuit and correcting line pressure.Requires F-22771-TL19 tool kit & VB-FIX reaming fixture More Information
Tool kit for 22771-19K. More Information
CHRYSLER RWD 1970-2002 NUETRAL SAFETY BACK UP- INSULATOR
Replaces 53635
.264" diameter. This upgraded sleeve and plug kit restores hydraulic integrity of the circuit. More Information
Excessive wear at the regulator valve pressure sleeve causes low boost pressure in reverse resulting in reverse gear slippage, poor cool charge at idle and poor forward engagement. This upgraded sleeve and plug kit restores hydraulic integrity of the circuit. No machining required. More Information
A500 A518 A618 42RE 46RE 47RE 48RE transmission spring. More Information
Longer band strut allows the use of a resurfaced reverse drum.
Sonnax 22301B-01KMore Information
56361-TL is also required.More Information
Reverse servo piston 2.80" OD. Designed to prevent the piston from sticking in the bore. More Information
Replacement piston for A618 47RE-RH with split type band 1994 found in diesels and V10 models. More Information
This piston corrects direct clutch failure caused by pin to piston wear. More Information
These are direct replacements for lost or damaged E-rings.
SONNAX 12783-01K. This shim kit contains 1 x .175"- 4.445mm spacer and 3 x .010" (.254 mm) shims.More Information
Overdrive planetary to sungear
Repairs the broken fitting for the cooler return line. The kit contains 5 fittings and a thread tap.More Information
This valve prevents lock up shudder, soft torque converter apply and torque converter overheating. Can only be used on unit with the 4 spool OEM valve. More Information
Use to repair the accumulator bore and save the case. This is a direct replacement part, no machining required. More Information
These parts enable the removal of the plug and pilot from the intermediate shaft for cleaning. This is a direct replacement part. 5 Per Bag.More Information
Replacement governor valve will salvage governors with a worn aluminum primary governor valve. More Information
This valve is designed to allow oil to flow into the converter charge circuit as soon as the engine is started. Tool # F-22771A-TL7 is also required.More Information
U-shaper bracket on the top of the valve body that retains the boost spring and valve. This broken retainer will cause loose pressure for 4th gear and or TCC apply. 5 per bag. More Information
SONNAX 22912-01K is made from hardened steel. More Information
Reduces pressure loss 1-2 & 2-3 governor circuit. More Information
Tool kit 22771A-TL13 Is Required. More Information
Tool kit for 22771A-TLMore Information
46RH/RE, 47RH/RE, 48RE THE SURE CURE KIT More Information
COMP 22771-TL12 REAMER
46RH/RE, 47RH/RE THE SURE CURE KIT More Information
