This Sonnax Sure Cure reconditioning kit helps cure converter shudder,repeated planetary failure, high line pressure, pump seal leakage,1-2 shudder, 2nd gear starts.Comes with complete, easy to follow instructions.Tool #92003-TL is recommended.More Information
More Information
Tool F-92835-TL is required. More Information
Fits shaft with 1.162" outside diameter. This bushing restores tolerance between the hub and inner shaft thus restoring lube flow to the planetary. 5 Per bag.More Information
Fits shaft with 1.142" outside diameter. This bushing restores tolerance between the hub and inner shaft, restoring lube flow to the planetary. 5 Per bag.More Information
5 per bag, 9410" diameter More Information
Underdrive Clutch Bushing Install Tool for 92003-01K. More Information
Prevents underdrive clutch failure. Tool 92003-TL is required. More Information
Replaces the gasket between the piston retainer and the case. Prevents codes 24, 41, 60. Delayed reverse engagement. This is a direct replacement part. No machining required. More Information
This switch valve improves converter clutch solenoid control over the apply rate, reducing EMCC cycling. The bias valve is designed with internal relief to limit apply pressure. More Information
This bypass valve corrects converter clutch slippage and code 38, erratic coast down bumps, soft long 1-2 shift, erratic switch codes. 2 Per bag. More Information
Solenoid diaphrams (9 per pack) More Information
Solenoid repair brass contacts (9 per pack). More Information
Oversize solenoid switch valve plugs. Tool 92835-RM is required More Information
Oversize solenoid switch valve plugs. More Information
Requires VB-Fix Valve Body Reaming Fixture, More Information
