Rear end-play shims .010" 3 and 4 tang. 10 Per bag. More Information
More Information
Sonnax 22771A-02K is designed to allow oil to flow into the converter charge circuit as soon as the engine is started. No machining required.More Information
This valve is designed to allow oil to flow into the converter charge circuit as soon as the engine is started. Tool # F-22771A-TL7 is also required. More Information
This Sonnax transmission valve is designed for all rear wheel drive CHRYSLER units. This manual shift valve allows converter charge in park and reverse and DOES NOT cause forward clutch drag in park. No machining required. More Information
Continuous movement and vibration of the shifter causes wear to the valve body detent ball bore. By oversizing the detent bore and installing this precision steel sleeve and ball replacement corrects the problem. Sonnax 22771-TL12 tool is required. More Information
Use with 22771-12K More Information
Corrects over sensitive 3-2 kickdown and late 2-3 upshift. More Information
Sonnax 22771-HDK3 More Information
CHRYSLER RWD 1970-2002 NUETRAL SAFETY BACK UP- INSULATOR
.264" diameter. This upgraded sleeve and plug kit restores hydraulic integrity of the circuit. More Information
Excessive wear at the regulator valve pressure sleeve causes low boost pressure in reverse resulting in reverse gear slippage, poor cool charge at idle and poor forward engagement. This upgraded sleeve and plug kit restores hydraulic integrity of the circuit. No machining required. More Information
Longer band strut allows the use of a resurfaced reverse drum.
Sonnax 22301B-01KMore Information
56361-TL is also required.More Information
Reverse servo piston 2.80" OD. Designed to prevent the piston from sticking in the bore. More Information
Replacement piston for A618 47RE-RH with split type band 1994 found in diesels and V10 models. More Information
This piston corrects direct clutch failure caused by pin to piston wear. More Information
These are direct replacements for lost or damaged E-rings.
Repairs the broken fitting for the cooler return line. The kit contains 5 fittings and a thread tap.More Information
Use to repair the accumulator bore and save the case. This is a direct replacement part, no machining required. More Information
This valve is designed to allow oil to flow into the converter charge circuit as soon as the engine is started. Tool # F-22771A-TL7 is also required.More Information
SONNAX 22912-01K is made from hardened steel. More Information
COMP 22771-TL12 REAMER
