Sonnax 22771A-02K is designed to allow oil to flow into the converter charge circuit as soon as the engine is started. No machining required.More Information
This valve is designed to allow oil to flow into the converter charge circuit as soon as the engine is started. Tool # F-22771A-TL7 is also required. More Information
More Information
This Sonnax transmission valve is designed for all rear wheel drive CHRYSLER units. This manual shift valve allows converter charge in park and reverse and DOES NOT cause forward clutch drag in park. No machining required. More Information
Continuous movement and vibration of the shifter causes wear to the valve body detent ball bore. By oversizing the detent bore and installing this precision steel sleeve and ball replacement corrects the problem. Sonnax 22771-TL12 tool is required. More Information
Use with 22771-12K More Information
CHRYSLER RWD 1970-2002 NUETRAL SAFETY BACK UP- INSULATOR
Excessive wear at the regulator valve pressure sleeve causes low boost pressure in reverse resulting in reverse gear slippage, poor cool charge at idle and poor forward engagement. This upgraded sleeve and plug kit restores hydraulic integrity of the circuit. No machining required. More Information
A500 A518 A618 42RE 46RE 47RE 48RE transmission spring. More Information
This valve prevents lock up shudder, soft torque converter apply and torque converter overheating. Can only be used on unit with the 4 spool OEM valve. More Information
These parts enable the removal of the plug and pilot from the intermediate shaft for cleaning. This is a direct replacement part. 5 Per Bag.More Information
Replacement governor valve will salvage governors with a worn aluminum primary governor valve. More Information
Reduces pressure loss 1-2 & 2-3 governor circuit. More Information
Tool kit 22771A-TL13 Is Required. More Information
Tool kit for 22771A-TLMore Information
COMP 22771-TL12 REAMER
