0.061" thick, fiber thrust washer. 1 required.

.084" thick, fiber washer. 1 required.

.102" thick, fiber washer. 1 required.

.065" Thick, Metal Washer, 1.075" Outside X 0.064 Inside Diameter. 1 required.

.032" thick, metal washer, 1.000" outside X 0.064 inside diameter. 1 required.

.068" thick, metal washer, 0.072 inside diameter. 1 required.

.061" thick, 3 tab metal washer, 3.400" outside X 2.520 inside diameter.
Use with 3 gear planetary. 2-4 required.

.061" thick, 4 tab metal washer, 3.400" outside X 2.520 inside diameter.
Use with 4 gear planetary. 2-4 required.

Rear end-play shims .010" 3 and 4 tang. 10 Per bag.
More Information

More Information

A727 A518 A618 46RE 47RE transmission bearing
2.835" outside diameter X 1.380 inside diameter.

The shim  provided are designed to be placed under the OE washer of the forward clutch drum. This allows the end play to be tightened up without pulling the input shaft ring area outward from the stator support shaft. This kit includes three .025 shims and three .015 shims in most cases is enough for two transmissions.