This 700R4 4L60E pan has been redesigned to fit more applications then previous designs.
Features include a much stronger magnetic drain plug and rubber/steel reusable washer and an 1/8" NPT temperature sender bung located in the side of the pan.
Finished with a durable black zinc finish. Fluid capacity increases by 2 qts.
This 700R4 4L60E transmission pan is 4" deep with a drain plug.
NOTE This transmission pan is not used as the primary transmission fluid cooling,
A fluid flow cooler must also be used.

Transmission fluid cooler size 12 1/2" X 17 X 3/4". Comes with mounting hardware.

Transmission cooler size 10" X 17" X 3/4". Comes with mounting hardware.
This transmission fluid cooler features 1/2" copper tubes and 3/4" aluminum fins with turbulator inserts to agitate the fluid flow for increased cooling. Black power coated with plastic fin protectors.

Transmission cooler size 7 1/2" X 17" X 3/4". Comes with mounting hardware.
This transmission cooler features 1/2" copper tubes and 3/4" aluminum fins with turbulator inserts to agitate the fluid flow for increased cooling. Black power coated with plastic fin protectors.

Transmission fluid cooler size 5" X 17" X 3/4". Comes with mounting hardware.

Transmission cooler flush, prevents contamination of new or rebuilt transmission, removes grease, dirt, sludge, metal shavings.
No water or soapy residue left to contaminate new fluid.
No CFC'S, contains no chlorinated solvents.
12-13.25 oz. contaners per case