This 700R4 4L60E pan has been redesigned to fit more applications then previous designs.
Features include a much stronger magnetic drain plug and rubber/steel reusable washer and an 1/8" NPT temperature sender bung located in the side of the pan.
Finished with a durable black zinc finish. Fluid capacity increases by 2 qts.
This 700R4 4L60E transmission pan is 4" deep with a drain plug.
NOTE This transmission pan is not used as the primary transmission fluid cooling,
A fluid flow cooler must also be used.

Transmission fluid cooler size 5" X 17" X 3/4". Comes with mounting hardware.

Transmission cooler size 7 1/2" X 17" X 3/4". Comes with mounting hardware.
This transmission cooler features 1/2" copper tubes and 3/4" aluminum fins with turbulator inserts to agitate the fluid flow for increased cooling. Black power coated with plastic fin protectors.

Transmission Fluid Cooler Size 6" X 11" X 3/4". Kits include mounting hardware.

Transmission Fluid Cooler Size 7 1/2" X 11" X 3/4". Kits include mounting hardware.
Plate and fin design requires 30% less space to install than tube and fin coolers.
Power coated finish with 3/8" push on hose fittings.

2 metal clips and 2 o-rings.

For push in type cooling lines.